The Metalsub lights are products developed through long experience in the diving community and they are manufactured with the latest advanced technology. The light weight metal housing with a chemical hardened surface layer makes the torches useable for sport and technical divers under any circumstances.

The diving light has a separate battery pack which can be mounted on the bottle or BCD. The cablelight is connected on the battery pack with a specially developed connector attached to a long cable. The battery pack connection on the jacket or bottle is a invention on its own and easy to use. Our torches are guaranteed to a maximum depth of 100 metre / 330 feet.

Electronic Circuit
The inner side of the lamps is made of aluminium, so the heat will be easily conducted to the casing.

It’s also a very stable basis for the electronics.

Metalsub halogen divelights have a variable lightpower from 0 – 100%.

This dim function is supplied by two magnets, one in the switch and one in the innerside of the lamp.

Leakage is impossible because there is no turning gallant in the lamp.

An electronic microprocessor controlled circuit in the Metalsub divelight warns the diver when approximately 10 minutes of light remains. With this technique the batterypack turns off after 20 minutes of light remains. With this technique the batterypack turns off after 10 minutes to protect against depth discharging.

Fastening onto a cylinder
The tank plate can be easily mounted by looping the BCD belt through the slots in the plate (figure). The tank plate can also be clipped to the cylinder with the aid of stainless steel hoseclips (figure).

Fastening onto a twinning set
A. The tankplate can be attached with stainless steel hoseclips to one of the cylinders.

B. It is also possible to use a Metalsub mounting plate and to attach this between the cylinders.